Incoloy 825 Flanges

Specifications Of Incoloy 825 Flanges

Equivalent Grades of Incoloy 825 Flanges

Chemical Composition of Incoloy 825 Flanges

Mechanical Properties of Incoloy 825 Flanges

Different Type Of Incoloy 825 Flanges

Dimensions of Of Incoloy 825 Flanges

Weight Chart Of Incoloy 825 Flanges

Price List Of Incoloy 825 Flanges

ASTM B564 Incoloy 825 Flat Flange, ASTM B564 Incoloy 825 Orifice Flange, Incoloy 825 tongue & groove Flanges, UNS N08825 Square Flange, UNS N08825 Blind Flange, ASME SB564 Incoloy 825 Threaded Flange, UNS N08825 Weld Neck Flange, ASME SB564 Incoloy 825 RTJ Flange, Incoloy 825 Reducing Flange, ASTM B564 Incoloy 825 Slip On Flange, UNS N08825 Lap Joint Flange.

Incoloy 825 Reducing Flange Exporter, ASME SB564 Incoloy 825 Longweld Neck Flange Supplier, ASTM B564 Incoloy 825 Slip On Flange Supplier, ASME SB564 Incoloy 825 RTJ Flange Stockist, ASTM B564 Incoloy 825 Orifice Flange Manufacturer, Incoloy 825 SORF Flange Stockist, Incoloy 825 Forge Flange Manufacturer, UNS N08825 Lap Joint Flange Stockist.

Specifications Of Incoloy 825 Flanges

Standards	ANSI/ASME B16.5, EN Flanges, BS 10, B16.47 Series A & B, EN-1092, ASME Flanges, BS Flanges, B16.48, DIN, DIN Flanges, GOST Flanges, ANSI Flanges, BS4504.
Size	1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Pressure Rating	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Production technique	Forged, Heat treated and machined
Special design	As per your drawing
	AS, ANSI, BS, DIN and JIS
	15 NB (1/2") to 200 NB (8")
	Equal and Reducing Configurations
Connect Type/ Flange Face Type	Ring Type Joint (RTJ), Small Tongue, Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Flat Face (FF), Large Tongue & Groove, Large Male-Female (LMF).
Largest Bore Diameter Sizes	NPS ≤ 10
Minimum & Maximum Size	1/2" To 48"
Origin	Indian / Japan / Korean / West Europe / USA
JIS Standard	5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
A182 Flange EN	6Bar 10Bar 16Bar 25Bar 40Bar
Test Certificates	EN 10204/3.1B
	Raw Materials Certificate
	100% Radiography Test Report
	Third Party Inspection Report, etc.
Application	Gas, Power, Chemical, Metallurgy, Petroleum, Shipbuilding, Construction etc.

Equivalent Grades of Incoloy 825 Flanges

STANDARD	WERKSTOFF NR.	UNS	GOST	AFNOR	JIS	BS	EN	OR
Incoloy 800	1.4876	N08800	ЭИ670	Z8NC32-21	NCF 800	NA 15	X10NiCrAlTi32-20	XH32T
Incoloy 800H	1.4958 / 1.4876	N08810	ЭИ670	Z8NC33-21	NCF 800H	NA 15(H)	X5NiCrAlTi31-20	XH32T
Incoloy 800HT	1.4859 / 1.4876	N08811	ЭИ670	-	NCF 800HT	NA 15(HT)	X8NiCrAlTi32-21	XH32T

Chemical Composition of Incoloy 825 Flanges

Grade	C	Mn	Si	S	Cu	Fe	Ni	Cr	Al	Ti
800	0.10 max	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60
800H	0.05 – 0.10	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60
800HT	0.06 – 0.10	1.50 max	1.00 max	0.015 max	0.75 max	39.50 min	30.00 – 35.00	19.00 – 23.00	0.15 – 0.60	0.15 – 0.60

Mechanical Properties of Incoloy 825 Flanges

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Alloy 800 / 800H / 800HT	7.94 g/cm3	1385 °C (2525 °F)	Psi – 75,000 , MPa – 520	Psi – 30,000 , MPa – 205	30 %

Different Type Of Incoloy 825 Flanges

ASME SB564 Incoloy 825 Lap Joint Flanges

ASTM B564 Incoloy 825 Threaded Flanges

UNS N08825 Socket Weld Flanges

Incoloy 825 Long Weld Neck Flanges

ASME SB564 Incoloy 825 Weldo / Nipo Flanges

ASTM B564 Incoloy 825 Orifice Flanges

ASTM B564 Incoloy 825 Plate Flange

ASME SB564 Incoloy 825 Reducing Flanges

ASTM B564 Incoloy 825 Flat Flanges

ASME SB564 Incoloy 825 Insert Flanges

UNS N08825 Jacket Insert Flanges

Incoloy 825 Standard Insert Flanges

ASTM B564 Incoloy 825 Loose Flanges

ASME SB564 Incoloy 825 RTJ Flanges

ASTM B564 Incoloy 825 SWRF Flanges

ASME SB564 Incoloy 825 Expander Flanges

UNS N08825 Tongue & Groove Flanges

Dimensions Of Incoloy 825 Flanges

Nom. Pipe Size	O	T	R	X	No./Dia. of Holes	Bolt Circle Dia.	L2	H	B2	L	B	r	L3	B3	D
1/2	3.5	0.44	1.38	1.19	4-0.62	2.38	1.88	0.84	0.62	0.62	0.88	0.12	0.62	0.9	0.38
3/4	3.88	0.5	1.69	1.5	4-0.62	2.75	2.06	1.05	0.82	0.62	1.09	0.12	0.62	1.11	0.44
1	4.25	0.56	2	1.94	4-0.62	3.12	2.19	1.32	1.05	0.69	1.36	0.12	0.69	1.38	0.5
1-1/4	4.62	0.62	2.5	2.31	4-0.62	3.5	2.25	1.66	1.38	0.81	1.7	0.19	0.81	1.72	0.56
1-1/2	5	0.68	2.88	2.56	4-0.62	3.88	2.44	1.9	1.61	0.88	1.95	0.25	0.88	1.97	0.62
2	6	0.75	3.62	3.06	4-0.75	4.75	2.5	2.38	2.07	1	2.44	0.31	1	2.46	0.69
2-1/2	7	0.88	4.12	3.56	4-0.75	5.5	2.75	2.88	2.47	1.12	2.94	0.31	1.12	2.97	0.75
3	7.5	0.94	5	4.25	4-0.75	6	2.75	3.5	3.07	1.19	3.57	0.38	1.19	3.6	0.81
3-1/2	8.5	0.94	5.5	4.81	8-0.75	7	2.81	4	3.55	1.25	4.07	0.38	1.25	4.1	0.88
4	9	0.94	6.19	5.31	8-0.75	7.5	3	4.5	4.03	1.31	4.57	0.44	1.31	4.6	0.94
5	10	0.94	7.31	6.44	8-0.88	8.5	3.5	5.56	5.05	1.44	5.66	0.44	1.44	5.69	0.94
6	11	1	8.5	7.56	8-0.88	9.5	3.5	6.63	6.07	1.56	6.72	0.5	1.56	6.75	1.06
8	13.5	1.12	10.62	9.69	8-0.88	11.75	4	8.63	7.98	1.75	8.72	0.5	1.75	8.75	1.25
10	16	1.19	12.75	12	12-1.00	14.25	4	10.75	10.02	1.94	10.88	0.5	1.94	10.92	1.31
12	19	1.25	15	14.38	12-1.00	17	4.5	12.75	12	2.19	12.88	0.5	2.19	12.92	1.56
14	21	1.38	16.25	15.75	12-1.12	18.75	5	14	13.25	2.25	14.14	0.5	3.12	14.18	1.63
16	23.5	1.44	18.5	18	16-1.12	21.25	5	16	15.25	2.5	16.16	0.5	3.44	16.19	1.75
18	25	1.56	21	19.88	16-1.25	22.75	5.5	18	17.25	2.69	18.18	0.5	3.81	18.2	1.94
20	27.5	1.69	23	22	20-1.25	25	5.69	20	19.25	2.88	20.2	0.5	4.06	20.25	2.13
22	29.5	1.81	25.25	24.25	20-1.38	27.25	5.88	22	21.25	3.13	22.22	0.5	4.25	22.25	2.38
24	32	1.88	27.25	26.12	20-1.38	29.5	6	24	23.25	3.25	24.25	0.5	4.38	24.25	2.5

Weight Chart Of Incoloy 825 Flanges

Normal Sizes In inch	Dimension	Flanges Dimensional Sizes 1/2 inch. to 2 1/2 inch.
		Class 125 Class 150		Class 300		Class 400		Class 600		Class 900		Class 1500		Class 2500
		inch.	mm	inch.	millimeter	inch.	mm	inch.	mm	inch.	mm	inch.	mm	inch		mm
1/2	A	3 1/2	88.9	3 3/4	95.2	3 3/4	95.2	3 3/4	95.2	4 3/4	121	4 3/4	121	5 1/4	133.4
	b	7/16	11.1	9/16	14.3	9/16	14.3	9/16	14.3	7/8	22.2	7/8	22.2	1 3/16	30.2
	D2	1 3/8	34.9	1 3/8	34.9	1 3/8	34.9	1 3/8	34.9	1 3/8	34.9	1 3/8	34.9	1 3/8	34.9
	D1	2 3/8	60.3	2 5/8	66.7	2 5/8	66.7	2 5/8	66.7	3 1/4	82.6	3 1/4	82.6	3 1/2	88.9
	n	4	4	4	4	4	4	4	4	4	4	4	-	4	44
	d	5/8	15.9	5/8	15.9	5/8	15.9	5/8	15.9	7/8	22.2	7/8	22.2	7/8	22.2
3/4	A	3 7/8	98.4	4 5/8	117.5	4 5/8	117.5	4 5/8	117.5	5 1/8	130	5 1/8	130	5 1/2	139.7
	b	1/2	12.7	5/8	15.9	5/8	15.9	5/8	15.9	1	25.4	1	25.4	1 1/4	31.8
	D2	1 11/16	42.9	1 11/16	42.9	1 11/16	42.9	1 11/16	42.9	1 11/16	42.9	1 11/16	42.9	1 11/16	42.9
	D1	2 3/4	69.8	3 1/4	82.5	3 1/4	82.5	3 1/4	82.5	3 1/2	88.9	3 1/2	88.9	3 3/4	95.2
	n	4	4	4	4	4	4	4	4	4	4	4	-	4	44
	d	5/8	15.9	3/4	19	3/4	19	3/4	19	7/8	22.2	7/8	22.2	7/8	22.2
1	A	4 1/4	108	4 7/8	123.8	4 7/8	123.8	4 7/8	123.8	5 7/8	149.2	5 7/8	149.2	6 1/4	159
	b	9/16	14.3	11/16	17.5	11/16	17.5	11/16	17.5	1 1/8	28.6	1 1/8	28.6	1 3/8	34.9
	D2	2	50.8	2	50.8	2	50.8	2	50.8	2	50.8	2	50.8	2	50.8
	D1	3 1/8	79.4	3 1/2	88.9	3 1/2	88.9	3 1/2	88.9	4	102	4	102	4 1/4	108
	n	4	4	4	4	4	4	4	4	4	4	4	4	4	4
	d	5/8	15.9	3/4	19	3/4	19	3/4	19	1	25.4	1	25.4	1	25.4
1 1/4	A	4 5/8	117.5	5 1/4	133.4	5 1/4	133.4	5 1/4	133.4	6 1/4	159	6 1/4	159	7 1/4	184.2
	b	5/8	15.9	3/4	19	13/16	20.6	13/16	20.6	1 1/8	28.6	1 1/8	28.6	1 1/2	38.1
	D2	2 1/2	63.5	2 1/2	63.5	2 1/2	63.5	2 1/2	63.5	2 1/2	63.5	2 1/2	63.5	2 1/2	63.5
	D1	3 1/2	88.9	3 7/8	98.4	3 7/8	98.4	3 7/8	98.4	4 3/8	111	4 3/8	111	5 1/8	130
	n	4	4	4	4	4	4	4	4	4	4	4	4	4	4
	d	5/8	15.9	3/4	19	3/4	19	3/4	19	1	25.4	1	25.4	1 1/8	28.6
1 1/2	A	5	127	6 1/8	155.6	6 1/8	155.6	6 1/8	155.6	7	177.8	7	177.8	8	203
	b	11/16	17.5	13/16	20.6	7/8	22.2	7/8	22.2	1 1/4	31.8	1 1/4	31.8	1 3/4	44.5
	D2	2 7/8	73 98	2 7/8	73	2 7/8	73	2 7/8	73	2 7/8	73	2 7/8	73	2 7/8	73
	D1	3 7/8	4	4 1/2	114	4 1/2	114	4 1/2	114	4 7/8	124	4 7/8	124	5 3/4	146
	n	4	4	4	4	4	4	4	4	4	4	4	4	4	4
	d	5/8	. 15.9	7/8	22.2	7/8	22.2	7/8	22.2	1 1/8	28.6	1 1/8	28.6	1 1/4	31.8
2	A	6	152.4	6 1/2	165.1	6 1/2	165.1	6 1/2	165.1	8 1/2	215.9	8 1/2	215.9	9 1/4	234.9
	b	3/4	19	7/8	22.2	1	25.4	1	25.4	1 1/2	38.1	1 1/2	38.1	2	50.8
	D2	3 5/8	92.1	3 5/8	92.1	3 5/8	92.1	3 5/8	92.1	3 5/8	92.1	3 5/8	92.1	3 5/8	92.1
	D1	4 3/4	121	5	127	5	127	5	127	6 1/2	165.1	6 1/2	165.1	6 3/4	171
	n	4	4	8	8	8	8	8	8	8	8	8	8	8	8
	d	3/4	19	3/4	19	3/4	19	3/4	19	1	25.4	1	25.4	1 1/8	28.6
2 1/2	A	7	177.8	7 1/2	190.5	7 1/2	190.5	7 1/2	190.5	9 5/8	244	9 5/8	244	10 1/2	266.7
	b	7/8	22.2	1	25.4	1 1/8	28.6	1 1/8	28.6	1 5/8	41.3	1 5/8	41.3	2 1/4	57.2
	D2	4 1/8	104.8	4 1/8	104.8	4 1/8	104.8	4 1/8	104.8	4 1/8	105	4 1/8	105	4 1/8	105
	D1	5 1/2	139.7	5 7/8	149.2	5 7/8	149.2	5 7/8	149.2	7 1/2	190.5	7 1/2	190.5	7 3/4	197
	n	4	4	8	8	8	8	8	8	8	8	8	8	8	8
	d	3/4	19	7/8	22.2	7/8	22.2	7/8	22.2	1 1/8	28.6	1 1/8	28.6	1 1/4	31.8

Price List Of Incoloy 825 Flanges

ASTM B564 Incoloy 825 Slip On Flanges	USD $10.22 - $35.55 / Piece (FOB Price) on request
Incoloy 825 Weld Neck Flanges	USD $10.22 - $35.55 / Piece (FOB Price) on request
Incoloy 825 Lap Joint Flanges	USD $10.22 - $35.55 / Piece (FOB Price) on request
Incoloy 825 Threaded Flanges	USD $10.22 - $35.55 / Piece (FOB Price) on request
UNS N08800/ N08810/ N08811 Socket Weld Flanges	USD $10.22 - $35.55 / Piece (FOB Price) on request

Marking and Packing

Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All pipes are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products.

Wooden Boxes

Wooden Pallets

Shrink-Wrapped

Carton Boxes

Wooden Boxes

Quality Assurance

At JF Engineering Products LLP, all fasteners are subject to strict inspection at each stage of the production process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.

Testing

Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

Positive Material Identification - PMI Testing
Chemical Analysis - Spectro Analysis
Mechanical Testing Such as Tensile, Elongation, Reduction of Area
Micro Test
Macro Test
Hardness Test
Pitting Resistance Test
Intergranular Corrosion (IGC) Test
Flaring Test
Flattening Test
Hydrostatic Test
Hydrogen-Induced Cracking (HIC) Test, NACE TM0284
Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Radiography Test
Dye Penetrant Test (DP Test)

SHIPPING POLICY

Delivery time and delivery dates are based on the "type and quantity" of steel ordered. Our sales team will provide a delivery schedule when quoting to you. On rare occasions the delivery schedule may change so please check with our sales department when placing any orders.

Orders will be sent out within 2-3 business days, and may take up to 5-10 business days in transit. If fastener is out of stock, orders may take up to 2-4 weeks to ship. JF Engineering Products LLP will notify buyer if this situation occurs.

Uses & Application

JF Engineering Products LLP take immensure pleasure in introducing itself as one of the leading Manufacturer & Exporter of high quality fasteners to meet the customer ultimate requirements in the fields of:

Construction

Bridges

Petrochemical Industry

Ship Building

Engineering

General Structural Purposes

Offshore and Onshore Services

Power Generation Industries

Food Processing Industries

Oil & Gas Industries

Sugar Industries